HOLIDAY SHIPPING DEADLINES
Note: Orders should be placed before 11AM PST on the cut-off day in order to arrive on or before Christmas.
U.S. to U.S. Tue 12/12 Web 12/13 Thu 12/14 Fri 12/15 Sat 12/16 Sun 12/17 Mon 12/18 Tue 12/19 Web 12/20 Thu 12/21 Fri 12/22 Sat 12/23 Sun 12/24 Sun 12/25
UPS Standard                        
UPS Ground                      
UPS 3 Day Select                      
UPS Saver                      
UPS 2nd Day Air                      
UPS Next Day Air                      
SHIPPING TYPE: PLACE ORDER BY:
UPS Standard Wednesday, Dec 13
UPS Ground Thursday, Dec 14
UPS 3 Day Select Monday, Dec 18
UPS Saver Wednesday, Dec 20
UPS 2nd Day Air Wednesday, Dec 20
UPS Next Day Air Thursday, Dec 21
Shipping with InnovaToys
We understand that no one likes to be surprised with expensive shipping rates as you’re checking out.
We also understand that it is important for you to know where your parcel is.
Here at InnovaToys, we design our shipping services to save you money and to provide you with peace of mind.
 

Products tagged with 'star wars'

Sort by
Display per page
SKU: AMMS266

StarWarsAM - Kylo Ren's Command Shuttle

The Kylo Ren's Command Shuttle appears in the new Star Wars: The Force Awakens movie.
$25.90
SKU: AMMS255

StarWarsAM - Destroyer Droid

Destroyer Droids, also known as Droidekas, were used by the Trade Federation during the invasion of the planet Naboo. These droids had shield generators and could curl into a ball for rapid movement.
$25.90
SKU: AMMS254

StarWarsAM - Imperial Star Destroyer

Designed to strike awe and terror into Rebels hearts, the Imperial Star Destroyer and the rest of the Empires fleet of space vessels maintain order in the galaxy through shows of power and ruthless fighting tactics. Is a capital ship. It first appears in the first seconds of Star Wars and is the signature vessel of the imperial fleet.
$25.90
SKU: AMMS250

StarWarsAM - R2-D2

R2-D2 is a fictional character in the Star Wars universe created by George Lucas.R2-D2 is a major character in all Star Wars films. Along with his protocol droid companion C-3PO, he joins or supports Anakin Skywalker, Luke Skywalker, Princess Leia, and Obi-Wan Kenobi in various points in the saga.
$25.90
SKU: MMS271

Star Wars - BB-8

Build your own BB-8 from Star Wars with ease with this Metal Earth BB-8 kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 1.85" x 1.85" x 3" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS270

Star Wars - C-3PO

Build your own C-3PO from Star Wars with ease with this Metal Earth C-3PO kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 2.6" x 1.3" x 4.72" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$16.95
SKU: ICX200B

ICONX - Millennium Falcon

Metal Earth ICONX models are larger in scale with more details. They are more challenging, and at the same time more satisfying, to assemble. ICONX Millennium Falcon starts as 2 4-inch by 8-inch steel sheets and finishes as a 4.25" x 3" x 2.75" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required. PRODUCT FEATURES • Product features an intricately designed 3D metal model building kit. • The kit consists of detailed laser etching cut onto 2 4-inch by 8-inch sheets of thin stainless steel. • Finished product portrays the Millennium Falcon • Size of finished model: 4.25" x 3" x 2.75"
$20.95
SKU: MMS261

Star Wars - AT-ST

Build your own AT-ST from Star Wars with ease with this Metal Earth AT-ST kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 3.5" x 2" x 1.75" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS260

Star Wars - Slave 1

Build your own Slave 1 from Star Wars with ease with this Metal Earth Slave 1 kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 3.25" x 2" x 3" (8.25 x 5.08 x 7.62 cm) 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required. PRODUCT FEATURES • Product features an intricately designed 3D metal model building kit. • The kit consists of detailed laser etching cut onto 2 4-inch square sheets of thin stainless steel. • Finished product portrays Slave 1 from Star Wars. • Size of finished model: 3.25" x 2" x 3" (8.25 x 5.08 x 7.62 cm)
$12.95
SKU: MMS259

Star Wars - Imperial Shuttle

Build your own Imperial Shuttle from Star Wars with ease with this Metal Earth Imperial Shuttle kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 4.25" x 2.5" x 4" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS258

Star Wars - Snowspeeder

Build your own Snowspeeder from Star Wars with ease with this Metal Earth Snowspeeder kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 1.25" x 3.25" x 3.00" (3.17 x 8.25 x 7.62 cm) 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS269

Star Wars - Poe Damerron's X-wing Fighter

Build your own Poe Damerron's X-wing Fighter from Star Wars with ease with this Metal Earth [model name] kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 2.50" x 4" x 4" (6.35 x 10.16 x 10.16 cm) 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS268

Star Wars - First Order Snowspeeder

Build your own First Order Snowspeeder from Star Wars with ease with this Metal Earth First Order Snowspeeder kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 1.35" x 3.25" x 2.25" (3.42 x 8.25 x 5.71 cm) 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS267

Star Wars - Special Forces TIE Fighter

Build your own Special Forces TIE Fighter from Star Wars with ease with this Metal Earth Special Forces TIE Fighter kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 3.50" x 2.25" x 2.00" (8.89 x 5.71 x 5.08 cm) 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS266

Star Wars - Kylo Ren's Command Shuttle

Build your own Kylo Ren's Command Shuttle from Star Wars with ease with this Metal Earth Kylo Ren's Command Shuttle kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 4.00" x 2.00" x 3.50" (10.16 x 5.08 x 8.89 cm) 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS257

Star Wars - X-Wing Star Fighter

Build your own X-Wing Star Fighter from Star Wars with ease with this Metal Earth X-Wing Star Fighter kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 4.01" x 3.38" x 2.04" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS256

Star Wars - Tie Fighter

Build your own Tie Fighter from Star Wars with ease with this Metal Earth Tie Fighter kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 2.55" x 2.36" x 2.87" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS255

Star Wars - Destroyer Droid

Build your own Destroyer Droid from Star Wars with ease with this Metal Earth Destroyer Droid kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 1.96" x 1.92" x 3.38" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS254

Star Wars - Imperial Star Destroyer

Build your own Imperial Star Destroyer from Star Wars with ease with this Metal Earth Imperial Star Destroyer kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 4.09" x 2.36" x 2.32" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS253

Star Wars - DV TIE Fighter

Build your own DV TIE Fighter from Star Wars with ease with this Metal Earth DV TIE Fighter kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 2.99" x 2.67" x 0.98" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS252

Star Wars - AT-AT

Build your own AT-AT from Star Wars with ease with this Metal Earth AT-AT kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 2.44" x 2.28" x 2.04" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS251

Star Wars - Millennium Falcon

Build your own Millennium Falcon from Star Wars with ease with this Metal Earth Millennium Falcon kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 2.83" x 2.2" x 1.81" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95
SKU: MMS250

Star Wars - R2-D2

Build your own R2-D2 from Star Wars with ease with this Metal Earth R2-D2 kit from Fascinations. This amazingly detailed etched model starts as 2 4-inch square steel sheets and finishes as a 2.75" x 1.96" x 1.37" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required.
$12.95